How To Build A Pole Shed - Economical And Quick!

Learning how to build a pole shed is really smart since they are the most cheap to build and also the fastest.

A pole shed is a really simple structure. Basically you put poles in the ground, cover them with walls and the put a roof on top.. that's it. Doesn't sound to complicated now does it?

But where to begin...

First of all you need to know how big it will be, a pole shed or more like a pole barn? The size makes a lot of diference as it will change weather you will have it free floating or if you will be putting the poles deep in the ground. It's clever to put the poles in the ground as it will make your shed sturdier and stronger.

Now, find a good place for your pole shed. Somewhere where the ground drains well and does not retain water. Sketch out your pole shed or simply buy a good plan (not expensive). I would recommend that you get a good plan as that will ensure that your shed will look good, stray strong and if you plans come with materials list then you will also just buy what you need saving you money. I would recommend MyShedPlans.

Before you start building make sure that you have a building permit, even if it's just a small shed. Better be on the safe side here, you don't want to have to tear it down if anybody complains.

Now, go to the hardware store and lumber yard for material. Make sure you get something heavy for the poles. then you need 2x4 inch lumber for the frame, 2x6 inch boards for room stringers, plywood for the walls and for the room I would recommend corrugated tin. You should also be able to get pre-built roof trusses from your lumber yard.

Now it's time to start. Begin with diggin holes for the poles. Make sure they are deep enough to go below frost level. Pour some concrete into the bottom. When it has ardened then put some gravel to drain moisture. Then raise the poles of your pole barn. Make sure that when you are digging the holes that the corners of our layout are exactly 90 degrees. Use your eyes and perhaps string to sight down the wall to make sure the poles are installed evenly.

Secure the stringers on to the tops of the poles. This part you have to do really well and make sure the stringers are very secure as they will be supporting the weight of the roof.

Install the roof trusses and then nail in the purlins (to secure the outer edge of the stringers to help supporting the trusses).

Now put the roof on. Make sure you overlap short sections for weather tightness and also for ease of installasion.

Now put the walls on the outside of your shed (if you want walls that is). Use 2x4 inch lumber as bracing and then plywood for the walls.

If you want blueprints and very easy to follow step-by-step instructions along with materials list you can do so at www.BuildAShed.info